Metal / Wood Working


Remove Dust in Grinding > A 1-1/4” Adjustable Aluminum Air Amplifier (Model No. SAM114A-1) adds extra vacuum power to an existing vacuum system to improve the collection of particles from grinding. In addition, the STREAMTEK™ Air Amplifiers can be used to gather and remove mist, smoke, fumes, and light materials because of their ability to entrain large volumes and convey them away.

	< CNC Machine Panel Coolers CNC Machine control panels can constantly overheat, especially as the ambient temperatures rise. Install a Model No. CC1225-1 Cabinet Panel Cooler and connect the air supply into the operation of the machine, so the cooler will only operate when the machine is on. <Top>

Coolant Mist Removal > Even with door closed, oily mists can easily escape into the surrounding environment. The Model 2” Adjustable Aluminum Air Amplifier (Model No. SAM002A-1) solves the problem, without failure of electric motors or an expensive vacuum system. <Top>

	< Blow-Off Car Bodies As car bodies move down an assembly line, three (3) Model AE48SPA 48" Aluminum Advanced Air Knives blow off any contaminants prior to the final paint process. <Top>

Hopper loading > A Model SV200TS 2" Stainless Steel Air Conveyor is an inexpensive, simple way to load wood/metal/plastic granules into a machine hopper. Convey metal shavings, ball bearings, nuts, bolts, screws, wood shavings/chips, etc. <Top>

	< Band Sawing Model TC015S Tool Cooler /w Single Point Hose eliminates liquid coolant in the cutting of bar stock. The cold air stops premature dulling and prolongs blade life. <Top>

Dry/Cool Metal Bars, Rods, and Pipe > A Model RB004S Hi-Temp Stainless Steel Air Wipe is an ideal solution to Blow-off water, chips, trim scrap, and dust. It's unique open and shut design allows for easy placement of products. Use it on continuous length products, like hoses, pipes, aluminum bars/rods, etc. The Hi-Temp Stainless Steel Air Wipe can withstand temperatures up to 800ºF (427ºC). <Top>

	< Drilling - Chip Removal The STREAMTEK™ Advanced Air Nozzle (Coming Soon) at a 25:1 air amplification ratio easily provides the cleaning power for a standard factory air gun! In addition, it meets OSHA requirements for noise limits and dead-end pressure. <Top>